DUNS: 61-362-0558 

Home
Up

Download  Brochure here!

 

SUPERCHARGER LEAK TESTER 

This Leak Tester was designed and built to check the Supercharger Intake Manifold, seen here.

                 

Once the operator has placed the intake onto the fixture, the cycle is activated and the intake is moved into the protected test area.             

The manifold must be sealed from Top, Bottom, and both ends, along with the recessed thermostat area and each of the (8) Injector holes. Custom designed seals and hydraulic cylinders perform this sealing.

Once the manifold is sealed, the test begins. There are (3) separate Leak Tests performed, then (3) tube inserts are checked for proper airflow. A USON Testra 1200 model leak tester is used to perform the leak and flow tests on the manifold.

A touch screen operator interface provides useful station information and allows individual tests to be performed, as well as manual operation of the station features.

The cycle is completed in approximately 45 seconds to assure that the manifold is within specification before being shipped to the final customer.

Send mail to steve@coastalbendtooling.com with questions or comments about this web site.
Last modified: 05/26/17